Triangle Shaped Antenna Design for IoT-based Lorawan Applications

Article Sidebar

View Abstract PDF download PDF View PDF
DOI https://doi.org/10.18090/samriddhi.v13i01.3
Published Jun 30, 2021
DOI https://doi.org/10.18090/samriddhi.v13i01.3

Main Article Content

M. Vamshi Krishna
Professor, Department of Electronics and Communication Engineering (ECE), Dhanekula Institute of Engineering and Technology, Vijayawada, Andhra Pradesh, India
G. S. N. Raju
Vice-Chancellor, Centurion University of Technology and Management, Gidijala, Andhra Pradesh, India.

Abstract

The antenna has a massive potential in the world of the Internet of Things (IoT). However, the miniaturized antenna design is a massive task as lorawan applications consume relatively lesser power. The design in this paper is a miniaturized E-shaped patch antenna for LoRa devices. The patch’s physical dimensions for the proposed antenna are 160mm*170mm*1.6mm on the FR-4 board. The simulated results were found satisfactory and can operate over the 868 MHz frequency band.

Downloads

Download data is not yet available.

Article Details

How to Cite
Krishna, M., & Raju, G. (2021). Triangle Shaped Antenna Design for IoT-based Lorawan Applications. SAMRIDDHI : A Journal of Physical Sciences, Engineering and Technology, 13(01), 8-11. https://doi.org/10.18090/samriddhi.v13i01.3
Issue
Vol 13 No 01 (2021): SAMRIDDHI: A Journal of Physical Sciences, Engineering and Technology
Section
Research Article
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.