An Experimental Analysis to Determine the Effects of Welding Parameters on Tensile Strength of Hot Air Welded Poly Vinyl Chloride (PVC) Plastic

Article Sidebar

View Abstract PDF download PDF View PDF
DOI https://doi.org/10.18090/samriddhi.v7i2.8629
Published Dec 25, 2015
DOI https://doi.org/10.18090/samriddhi.v7i2.8629

Main Article Content

Md Shakibul Haque
Department of Mechanical Engineering, Invertis University, Bareilly.
Inayat Hussain
Department of Mechanical Engineering, Invertis University, Bareilly
Athar Hussain
Department of Mechanical Engineering, Integral University, Lucknow.

Abstract

The present work has been carried out to study the effect of some input parameters on the desired response in the Poly Vinyl Chloride (PVC) plastic, welded by hot air technique. The effect of hot air temperature, welding speed and air flow rate has been evaluated on the Tensile Strength, of the weld bead deposited. These responses have been analysed using the analysis of variance (ANOVA) and experimental modeling. Plots of significant factors and experimental modeling have been used to determine the best fit relationship between the responses and the model parameters using MINITAB 17. This has been used to determine the most influencing parameter.

Downloads

Download data is not yet available.

Article Details

How to Cite
1.
Haque M, Hussain I, Hussain A. An Experimental Analysis to Determine the Effects of Welding Parameters on Tensile Strength of Hot Air Welded Poly Vinyl Chloride (PVC) Plastic. sms [Internet]. 25Dec.2015 [cited 8Aug.2025];7(02):71-8. Available from: https://smsjournals.com/index.php/SAMRIDDHI/article/view/1113
Issue
Vol 7 No 02 (2015): SAMRIDDHI: A Journal of Physical Sciences, Engineering and Technology
Section
Research Article
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.